ABUIABACGAAg_bbQ6AUo4aWL9AYwrAI4qwI

Wuxi Zhongheng Gas Equipment Co., Ltd.

Telephone Fax: 0510-83318825

Manager Chen: 19895736663

Manager Chen: 13395192958

Manager Liu: 13395131570

Address: No. 8 Huanzhen South Road, Yangshi City, Luoshui Town, Wuxi

Online Service
 Work Time
Mon to Fri :8:30-17:30
Sat to Sun :9:00-17:00
 Contact Details
address:No. 8 Huanzhen South Road, Yangshi City, Luoshui Town
mailbox:974220849qq.com
相关文章推荐
文章附图

Today, I want to share with you the use of PSA nitrogen m...

文章附图

PSA nitrogen machine is a new gas separation technology. ...

文章附图

Nitrogen generator is an advanced gas separation technolo...

Product Detail
Micro-thermal adsorption dryer
Share to:
Micro-thermal adsorption dryer
product details

微热吸附.jpg


产品先容.jpg


Product introduction:

Micro thermal regenerative adsorption is a desiccant, which combines the advantages of pressure swing adsorption and temperatureswing adsorption, adsorbs (works) at room temperature and high vapor partial pressure, and resolves (regenerates) at high temperature and low vapor partial pressure, i.e. the moisture adsorbed by adsorbent in the process of adsorption depends on the thermal diffusion of gas (heated dry air) and low pressure in the process of regeneration. The two mechanisms work together to eliminate them completely. It has the advantages of high efficiency and low gas consumption. Adsorption wet air enters A drying cylinder through A1 in the lower pipe system and flows up through the adsorbent layer. After drying, the air is discharged from the upper pipe and regenerated a small amount of dry air (about 5%) is discharged into B drying cylinder after decompression through the regeneration gas regulating valve in the upper pipe system and heated by this part of hot air (regenerated gas) into B drying cylinder. The adsorbent in the B tube is regenerated by desorption, and the drying capacity of the adsorbent is restored. The regenerated gas is discharged into the atmosphere through the lower pipeline B2 generator and muffler. After regeneration of sorbent, B2 valve is closed, B drying cylinder is pressurized to online working pressure, ready to switch. Switching lower pipe system B1 valve open, AI valve closed, A2 valve opened, A. B drying cylinder completed switching, B simply into adsorption, A cylinder pressure relief regeneration. The working sequence, working time and heating temperature are automatically controlled by the controller.

Product advantages:

1. Persist in optimum selection, excellent solenoid valves and controllers; Machine adsorbent composition is excellent to ensure long term and efficient operation of the machine.

2. The adsorbent is assembled proportionally with alumina molecular sieve, so that the effect of gas drying is obvious. Perfect intelligent protection device, high and low voltage protection, low temperature protection, overheating protection, automatic alarm shutdown, etc.

3. The adsorbent has a service life of up to 8000 hours, simple operation, low operating cost, sustainable operation and low power consumption.


产品特点.jpg


Seven characteristics:

1. Simple operation 2. Easy to use 3. Economical and applicable 4. Low energy consumption 5. High efficiency 6. Safety and stability 7. Wide application


维护注意.jpg


1. Normal supply of power supply, gas source and temperature conditions required by the machine and normal opening and closing;especially the stability of power supply voltage, nitrogen machine, reduce the damage to the controller and solenoid valve caused by power supply problems.

2. Always pay attention to the pressure of the air storage tank. Keep the pressure of the air storage tank between 0.7 MPA and 0.75 MPA. Do not lower than the rated value.

3. Check the automatic drain every day to avoid blocking and losing drainage function. If blocked, slightly open the manual valve, close the self draining valve and remove the automatic drain, decomposition and cleaning. When cleaning the automatic drain, soap foam can be used to clean it. Strictly prohibit the use of gasoline, toluene, pine perfume and other corrosive solutions.

4. Operators should regularly inspect the three pressure gauges on the machine, make a daily record of their pressure changes for equipment failure analysis, and observe the flow meter and nitrogen purity at any time, so as to maintain the nitrogen purity of the exhaust gas.

5. Operate and maintain the instrument according to the requirements of the code of use. Check the sensitivity of solenoid valve/pneumatic valve, the pressure range of pressure regulating valve, the precision of gas analyzer, the pressure of adsorption culture, the exhaust condition of muffler, the cleanliness of inner tube of flowmeter, etc. from time to time.


应用行业.jpg


Widely used in non ferrous metal heat treatment, chemical industry, rubber industry, pharmaceutical industry, food industry, metallurgical industry, electronic industry, glass industry, coal industry, aerospace technology support, petroleum industry, plastics industry, textile industry and other industries and fields.

Other articles recommended
文章附图

Nitrogen making machine is a nitrogen generating equipmen...

文章附图

What are the technical design features of nitrogen machin...

文章附图

What are the applications of nitrogen machine system in v...

文章附图

Nitrogen making machine is a nitrogen generating equipmen...

文章附图

Oxygen generator is a kind of machine which produces oxyg...

文章附图

Today Xiaobian will share with you the technical characte...

文章附图

What is the operating method of the oxygen generator? Her...

Customer Name: Ore Optoelectronics
Products purchased: 300 cubic meters nitrogen machine Customer evaluation: Zhongheng is very professional, delivery is very fast, after-sales is also very good, next time there is demand will continue to cooperate with them!
Customer Name: Huazhong Glass
Products purchased: 100 cubic meters of oxygen generator
Customer comments: excellent products, quality no problem......
Customer Name: Really Old
Products purchased: 20 cubic meters nitrogen machine
Customer evaluation: There is no problem with the quality......
Customer Name: Abram Magnesium Carbon Industry
Products purchased: 180 cubic meters nitrogen machine
Customer evaluation: The product......
Wuxi Zhongheng is a specialized manufacturer of gas separation equipment. It has advanced technical advantages in the nitrogen machine industry. Because of its focus, it is professional. With advanced science and technology, high quality and efficient service, it enjoys a good reputation in the industry and high-tech entities in many fields.
Our company has many years of research and development, production experience and customer experience in various types of gas air separation equipment. In line with the tenet of "scientific and technological innovation, pursuit of excellence, honest management", the company provides satisfactory products for the vast number of users.
The company's stable operation of equipment, superior performance, reliable after-sales service, won the unanimous praise of the majority of customers. Excellent staff team, advanced processing equipment, strict quality assurance system, perfect sales network, give full confidence in the future, but also give customers great confidence guarantee, let us work together to create a better tomorrow.
What is the operating method of the oxygen generator? Here is a short edition to share with you. The main engine is mounted on wheels ......
The special nitrogen machine for petroleum and natural gas industry is suitable for mainland oil and natural gas exploitation, coastal and deep-sea oil and...
XML 地图 | Sitemap 地图